Control Valve


Segmented V-PORT Control Valve

SVP TYPE

SPECIFICATIONS:

Design: ASME B16.34

Size: 1-1/ 2”-16”, FULL PORT/REDUCED TRIM OPTION.

Pressure Rating: Class (150# – 900#)

Face to Face: ISA S75.04/ASME B16.10.

End Connection:
-FLANGED/WAFER
-RF/RTJ
* ANSI/ASME B16.5 (1-1/2 – 16)”.

Test: Hydrostatic Tested 100% to API 598.


Download Technical Specifications

WBV TYPE

INVESTMENT CASTING BODY & CAP.
ASTM A 351 CF8M / ASTM A 216 WCB.
CONTROL VALVE (Heating jacketed)

Size: DN(15 – 150) PN10/16 , PN25/40 Wafer
( ½” – 6” ) ANSI 150#, ANSI 300# Wafer

FEATURES:

*CUERPO (01) UNA SOLA PIEZA PARA EVITAR FUGAS
-MATERIAL :ASTM A351 CF8M (316SST), ASTM A216
WCB (C.S)
*CONEXIÓN WAFER:
-DN (15- 150); PN16, DIN 2633/ PN40, DIN 2635
-(1/2” – 6”); ANSI 150#, RF/ ANSI 300#, RF, ANSI B16.5
*BOLA SOLIDA, CON INSERTO EN V PARA CONTROL DE
FLUJO
-SLOT LINEAL (LS)
-V – 30 º / V – 60 º / V – 90 º
*ASIENTOS
-RPTFE
-TFM1600 ( 250 º C)
*PACKING
-RPTFE
-TFM1600
-O-RING (VITON)
*VÁSTAGO A PRUEBA DE FUGAS
*ENVOLTURA PARA RE-CIRCULACIÓN DE ACEITE, PARA
CALENTAMIENTO DEL PROCESO
-MATERIAL (ASTM A351 CF8M / ASTM A216 WCB)
*CONEXIÓN A SISTEMA DE CALENTAMIENTO
-BRIDAS ( DN15, PN16, RTJ)
-MATERIAL (ASTM A351 CF8M / ASTM A216 WCB)
*DISEÑO A PRUEBA DE FUEGO
*BRIDA DE MONTAJE ISO 5211
*ACTUADOR ROTATORIO


31KM-C TYPE

INVESTMENT CASTING BODY & CAPS
ASTM A 351 – CF8M / ASTM A 351 – CF8 (DIN 1.4301), ASTM A 216 – WCB

FEATURES:

  • MODULATING,SOLID SS V-BALL, 60º , 45º, 30º V- BALL, NOT SEAT INSERT
  • NON-CLOGGING, FOR GENERAL & SLURRY APPLICATIONS
  • SHUT-OFF ANSI CLASS VI.
  • HIGHT TEMPERATURE SEATS
  • COMPACT&EASY MAINTENANCE, AS CHANGE A STANDARD

SEAT

  • MOUNTING PAD ISO 5211 STD
  • PNEUMATIC / ELECTRIC ACTUATOR, 3-15 PSI, 4-20 mA, HART Protocol,Profibus PA/Foundation Field Bus.
  • DIRECT / REVERSE & DOUBLE ATION
  • PIPE THREAD IN ACCORDANCE WITH:

– ANSI B2.1(BASIC STD FOR STEEL PIPE THREADS)
– ANSI B1.20 (NPTF), BS21:1973, DIN259/2999, ISO228

  • 1000 PSI W.O.G /BLOW-OUT PROOF STEM
  • HIGH PRESSURE DROP CAPABILITY
  • ECONOMICAL WITH LOW OPERATING COST

FBV-C TYPE

CONTROL VALVE

FEATURES:

  • MODULATING,SOLID SS V-BALL, 60º , 45º, 30º V- BALL, NOT SEAT INSERT
  • NON-CLOGGING, FOR GENERAL & SLURRY

APPLICATIONS

  • SHUT-OFF ANSI CLASS VI.
  • HIGHT TEMPERATURE SEATS
  • COMPACT&EASY MAINTENANCE, AS CHANGE A

STANDARD SEAT

  • PNEUMATIC / ELECTRIC ACTUATOR, 3-15 PSI, 4-20 mA, HART Protocol,Profibus PA/Foundation Field Bus.
  • DIRECT / REVERSE & DOUBLE ATION
  • FLANGED IN ACCORDANCE WITH:

– ANSI B16.5 / B16.10
– DIN 3202-F4
– PN10/16(DIN 2633); PN25/40(2635)

  • HIGH PRESSURE DROP CAPABILITY
  • ECONOMICAL WITH LOW OPERATING COST
  • TEST:

-API 598

  • HIGH PRESSURE DROP CAPABILITY
  • ECONOMICAL WITH LOW OPERATING COST
  • MATERIAL TRACEABILITY

Rotary Pneumatic Actuators


MRP TYPE

PNEUMATIC ACTUATORS
Twin piston rack & pinion
Extruded aluminum alloy body

FEATURES:

  • Double acting actuators available in output torques up 358756 inch pounds.
  • Spring return actuators available with spring break torque up to 79409 inch pounds.
  • A wider product range permitting a more economical sizing selection.
  • Design suitable for both indoor & outdoor installation. Supplied with corrosion protections for normal environments. For severe duties a wide selection of highest levels of corrosion protection are available.
  • Operating media: Dry or lubricated Air, inert / noncorrosive gases on condition that they are compatible with internal actuator parts and lubricants.
  • Lubricated for the life under normal operation conditions from -20 º C to 80 º C. Special lubricants for Low (LT) and High (HT) temperature service are available.

– Standard product from – 20ºC( -4 ºF) to 80 ºC( 176ºF)
– (LT) actuator with VMQ O-rings from -40ºC(-40ºC) to 80ºC( 176ºF)
– (HT) actuator with FPM O-rings from -15ºC( 5ºF) to 150ºC( 302ºF)
– Caution.
– For LT & HT services, special lubricant is required.
– H & L Temperature will vary change the output torque of the actuator.